Lexi Free-Standing Whirlpool Bathtub

Create a relaxing spot in your own house. Introducing Homeward Bath’s Luxurious heated whirlpool bathtub. This tub is freestanding and standing on leveling feet that make the installation easy.

Description

One person whirlpool bathtub, size 34.5 x 59.5 x 26.5 H in

• One person whirlpool tub
• ETL/CSA Certified
• Free-standing tub
• Inline heater included
• 10 water jets
• Polished finish
• Decorative clear glass
• Hand held shower with adjustable water spray settings
• Removable skirt for easy service
• Comfortable head rest
• Pre-mounted faucet and tub filler
• Contoured seating areas designed into tub floor
• Underwater lighting
• All tubs have adjustable height + or – an inch

GENERAL INFORMATION

• It is advised to have tub onsite before preparing drain location
• Note: All tubs need to be leveled in its final resting position with all feet touching the ground

TECHNICAL INFORMATION

• Materials: acrylic, tempered glass
• Power Supply: 110V
• Dimensions: 34.5 x 59.5 x 26.5H in

ELECTRICAL REQUIRMENTS

• 1 dedicated 10-2 line for water pump (line 1, ground and neutral)
• 110 volt, 30 amp GFCI breaker

PLUMBING REQUIRMENTS

• The unit is equipped with hot and cold metal braided water supply hoses with ½ inch national pipe thread
• Hot and cold shutoffs with ½ inch male national pipe thread (not included) should be installed
• Supply hoses are to be connected from the faucet manifold on the unit to the shutoff valves
• All water jet features are pre-plumbed with reinforced braided flexible supply hose
• All fixtures and fittings should be checked for tightness as they may have ben loosened during transportation
• Access panel area is recommended
• Substituting the existing drain show for a different one will not void the warranty as long as there is no damage or evidence of misuse Note: The flexible drain hose that is included with this unit is designed for installation into a floor drain only

*The Company shall bear no responsibility whatsoever for any act or failure to act by any entities installing and/or delivering the Company’s products to its customers.